It is a proved fact as well, that the nostalgic, breezy shading effect due to the unique 25-75 percent gap-slat ratio of wood shutters, helps to save a significant amount of electric energy used by air conditioning.
There was a time when the outer appearance of buildings was a negligible point. It happened then, that the facades of many national monument buildings were disfigured by vinyl shutters, like those of the National Bank or the building of the Hungarian Ministry of Interior. But after the reconstruction of these buildings they can be seen in their old beauty, and we are full of pride and delight, that our wood shutters contribute to it.
We thought it to be necessary to construct a shutter-case system that harmonizes with the exterior construction of wood shutters and wood windows, and to be adequate in every sense to the wood shutters in functioning. So, we converted the conventional shutter-case as well. We had to design a case that is really free of heat-bridges and which can be mounted on any kind of window or door, and is able to take in any kind of shutter. Made of the same material as the frame of the window or door, constructing a module system, it is satisfactory in size and structure for every technical or aesthetic demand
Our shutter-cases are made of outer and upper water-repellent and water-resistant OSB faces, the inner and lower surfaces, according to requests, are produced using the same materials as the door or window has, and having the same surface processing.
For the problem of the wood's surface processing, modern chemical industry gave the solution. Because of the poor quality of paints and primes used previously, in every couple of years continuous service was necessary. Today's modern stains, primers, great UV-resistant lacquers and paints do not need any kind of service or repair for ten-fifteen years.
Construction of shutter-cases makes it possible to build a mobile insect screen as a separate part, inside the arch-like case, and make it invisible from the outside.
In case of our shutters the boreholes made for the braces result in a tenth size decrease in the cross section of slats, compared to the space needed for the lamellae of "Esslingen" systems. This way they are much more resistant against mechanical impacts. We had the idea of completing it with a motor and push-up blocker retailed by SOMFY . With these versions, our company had to face increased safety requirements, which we managed to meet immediately.
Handling of the shutters can be manual by a strap or a drive or electric motor-driven. The zinc coated steel cylinders with ball bearings made manual handling easier, but modern electronics, the more comfortable motorised solution provides several useful opportunities. Such features are remote control, programming, wind, light and temperature automation and the possibility of connecting it to an alarm system.
Technical data of wood shutters: (made of Scots pine)
Cross section of slats: 41 x 15 mm
Maximum width of slats: 2,8 m
Maximum surface: 8,- m2
Weight of shutters: 9 -10 kg / m2